Infineon TRAVEO T2G - 2.3.9.6.28 CANFD_CH_RXF0 A

Technical Reference Manual 002-29852 Rev. *B
2.3.9.6.28 CANFD_CH_RXF0A
Description:
Rx FIFO 0 Acknowledge
Address:
0x405200A8
Offset:
0xA8
Retention:
Retained
IsDeepSleep:
No
Comment:
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name None [7:6] F0AI [5:0]
Bits 15 14 13 12 11 10 9 8
Name None [15:8]
Bits 23 22 21 20 19 18 17 16
Name None [23:16]
Bits 31 30 29 28 27 26 25 24
Name None [31:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
0:5 F0AI RW A 0 Rx FIFO 0 Acknowledge Index
After the Host has read a message or a sequence of
messages from Rx FIFO 0 it has to write the
buffer index of the last element read from Rx FIFO 0 to
F0AI. This will set the Rx FIFO 0 Get Index
RXF0S.F0GI to F0AI + 1 and update the FIFO 0 Fill
Level RXF0S.F0FL.
85
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers