Infineon TRAVEO T2G - 1.1.12 BACKUP_INTR_SET

Technical Reference Manual 002-29852 Rev. *B
1.1.12 BACKUP_INTR_SET
Description:
Interrupt set request register
Address:
0x40270030
Offset:
0x30
Retention:
Retained
IsDeepSleep:
No
Comment:
These bits are in vddbak domain. Allows setting interrupts for firmware testing.
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name None [7:3] CENTURY
[2:2]
ALARM2
[1:1]
ALARM1
[0:0]
Bits 15 14 13 12 11 10 9 8
Name None [15:8]
Bits 23 22 21 20 19 18 17 16
Name None [23:16]
Bits 31 30 29 28 27 26 25 24
Name None [31:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
0 ALARM1 RW1S A 0 Write with '1' to set corresponding bit in interrupt
request register.
1 ALARM2 RW1S A 0 Write with '1' to set corresponding bit in interrupt
request register.
2 CENTURY RW1S A 0 Write with '1' to set corresponding bit in interrupt
request register.
21
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers