Infineon TRAVEO T2G - 19.5.1.18.11 PASS_SAR_CH_GRP_STAT

Technical Reference Manual 002-29852 Rev. *B
19.5.1.18.11 PASS_SAR_CH_GRP_STAT
Description:
Group status register
Address:
0x40900828
Offset:
0x28
Retention:
Not Retained
IsDeepSleep:
No
Comment:
This register contains the status information required for a coherent read for the AutoSAR
'ADC Channel Group Status Service'
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name None [7:3] GRP
_OVERF
LOW [2:2]
GRP
_CANCE
LLED [1:1]
GRP
_COMPL
ETE [0:0]
Bits 15 14 13 12 11 10 9 8
Name None [15:11] CH
_OVERFL
OW [10:10]
CH_PULSE
_
COMPLETE
[9:9]
CH
_RANGE_
COMPLETE
[8:8]
Bits 23 22 21 20 19 18 17 16
Name None [23:17] GRP_BUSY
[16:16]
Bits 31 30 29 28 27 26 25 24
Name None [31:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
0 GRP_COMPLETE R W 0 Group acquisition complete.
This is a copy of the INTR.GRP_DONE bit.
1 GRP_CANCELLED R W 0 Group Cancelled.
This is a copy of the INTR.GRP_CANCELLED bit.
2 GRP_OVERFLOW R W 0 Group Overflow.
This is a copy of the INTR.GRP_OVERFLOW bit.
8 CH_RANGE_COMPLETE R W 0 Channel Range complete.
This is a copy of the INTR.CH_RANGE bit.
9 CH_PULSE_COMPLETE R W 0 Channel Pulse complete.
This is a copy of the INTR.CH_PULSE bit.
10 CH_OVERFLOW R W 0 Channel Overflow.
This is a copy of the INTR.CH_OVERFLOW bit.
16 GRP_BUSY R W 0 Group acquisition busy.
This is a copy of the TR_PENDING bit of the first
channel of the group.
1121
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers