Technical Reference Manual 002-29852 Rev. *B
26.8.18 PWR_LVD_CTL2
Description:
High Voltage / Low Voltage Detector (HVLVD) Configuration Register #2
Address:
0x40261024
Offset:
0x1024
Retention:
Retained
IsDeepSleep:
Yes
Comment:
Trim and configuration bits for Voltage Monitoring System.
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name None [7:0]
Bits 15 14 13 12 11 10 9 8
Name HVLVD2
_EN_HT
[15:15]
HVLVD2
_DPSLP
_EN_HT
[14:14]
None
[13:13]
HVLVD2_TRIPSEL_HT [12:8]
Bits 23 22 21 20 19 18 17 16
Name None [23:19] HVLVD2
_ACTION
[18:18]
HVLVD2_EDGE_SEL
[17:16]
Bits 31 30 29 28 27 26 25 24
Name None [31:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
8:12 HVLVD2_TRIPSEL_HT RW R 0 Threshold selection for HVLVD2 for HT products.
Detector accuracy is +/-4 percent of the nominal
values listed below. Disable the detector
(HVLVD1_EN=0) before changing the threshold.
0: rise 2.825V (nom), fall=2.8V (nom)
1: rise 2.925V (nom), fall=2.9V (nom)
2: rise 3.025V (nom), fall=3.0V (nom)
3: rise 3.125V (nom), fall=3.1V (nom)
4: rise 3.225V (nom), fall=3.2V (nom)
5: rise 3.325V (nom), fall=3.3V (nom)
6: rise 3.425V (nom), fall=3.4V (nom)
7: rise 3.525V (nom), fall=3.5V (nom)
8: rise 3.625V (nom), fall=3.6V (nom)
9: rise 3.725V (nom), fall=3.7V (nom)
10: rise 3.825V (nom), fall=3.8V (nom)
11: rise 3.925V (nom), fall=3.9V (nom)
12: rise 4.025V (nom), fall=4.0V (nom)
13: rise 4.125V (nom), fall=4.1V (nom)
14: rise 4.225V (nom), fall=4.2V (nom)
15: rise 4.325V (nom), fall=4.3V (nom)
16: rise 4.425V (nom), fall=4.4V (nom)
17: rise 4.525V (nom), fall=4.5V (nom)
18: rise 4.625V (nom), fall=4.6V (nom)
19: rise 4.725V (nom), fall=4.7V (nom)
20: rise 4.825V (nom), fall=4.8V (nom)
21: rise 4.925V (nom), fall=4.9V (nom)
22: rise 5.025V (nom), fall=5.0V (nom)
23: rise 5.125V (nom), fall=5.1V (nom)
24: rise 5.225V (nom), fall=5.2V (nom)
25: rise 5.325V (nom), fall=5.3V (nom)
others: reserved
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers