Technical Reference Manual 002-29852 Rev. *B
4.13.8.5 CM4_TRCCTI_CTIAPPPULSE
Description:
CTI Application Pulse Register
Address:
0xE008001C
Offset:
0x1C
Retention:
Retained
IsDeepSleep:
No
Comment:
The CTI Application Pulse Register is write-only. A write to this register causes a channel
event pulse, one CTICLK period, to be generated, corresponding to the bit written to. The
pulse external to the ECT can be extended to multi-cycle by the handshaking interface circuits.
This register clears itself immediately, so it can be repeatedly written to without software
having to clear it.
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name None [7:4] APPULSE [3:0]
Bits 15 14 13 12 11 10 9 8
Name None [15:8]
Bits 23 22 21 20 19 18 17 16
Name None [23:16]
Bits 31 30 29 28 27 26 25 24
Name None [31:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
0:3 APPULSE W R 0 Setting a bit HIGH generates a channel event pulse for
the selected channel. Write:
1 = channel event pulse generated for one CTICLK
period 0 = no effect.
There is one bit of the register for each channel.
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers
To Next Page
Loading...
