Infineon TRAVEO T2G - 15.25.4 GPIO_VDD_INTR_MASK

Technical Reference Manual 002-29852 Rev. *B
15.25.4 GPIO_VDD_INTR_MASK
Description:
Supply detection interrupt mask register
Address:
0x40314018
Offset:
0x4018
Retention:
Retained
IsDeepSleep:
No
Comment:
This register configures the supply detection interrupts for all supplies. This register only
masks the forwarding of interrupts to the CPU(s), it does not enable/disable the logging of
interrupts into the VDD_INTR register.
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name VDDIO_ACTIVE [7:0]
Bits 15 14 13 12 11 10 9 8
Name VDDIO_ACTIVE [15:8]
Bits 23 22 21 20 19 18 17 16
Name None [23:16]
Bits 31 30 29 28 27 26 25 24
Name VDDD
_ACTIVE
[31:31]
VDDA
_ACTIVE
[30:30]
None [29:24]
Bit-fields
Bits
Name SW HW Default or
Enum
Description
0:15 VDDIO_ACTIVE RW R 0 Masks supply interrupt on VDDIO.
'0': VDDIO interrupt forwarding disabled
'1': VDDIO interrupt forwarding enabled
30 VDDA_ACTIVE RW R 0 Same as VDDIO_ACTIVE for the analog supply
VDDA.
31 VDDD_ACTIVE RW R 0 Same as VDDIO_ACTIVE for the digital supply VDDD.
993
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers