Infineon TRAVEO T2G - 19.5.1.18.9 PASS_SAR_CH_WORK

Technical Reference Manual 002-29852 Rev. *B
19.5.1.18.9 PASS_SAR_CH_WORK
Description:
Working data register
Address:
0x40900820
Offset:
0x20
Retention:
Not Retained
IsDeepSleep:
No
Comment:
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name WORK [7:0]
Bits 15 14 13 12 11 10 9 8
Name WORK [15:8]
Bits 23 22 21 20 19 18 17 16
Name None [23:16]
Bits 31 30 29 28 27 26 25 24
Name VALID_MIR
[31:31]
PULSE
_MIR
[30:30]
RANGE
_MIR
[29:29]
ABOVE_HI
_MIR
[28:28]
None [27:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
0:15 WORK R RW Undefined SAR conversion working data of the channel. The data
is written here right after sampling this channel.
28 ABOVE_HI_MIR R W 0 mirror bit of the corresponding ABOVE_HI bit
29 RANGE_MIR R W 0 mirror bit of corresponding bit in WORK_RANGE
register
30 PULSE_MIR R W 0 mirror bit of corresponding bit in WORK_PULSE
register
31 VALID_MIR R W 0 mirror bit of corresponding bit in WORK_VALID
register
1119
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers