Infineon TRAVEO T2G - 26.8.25 CLK_ILO1_CONFIG

Technical Reference Manual 002-29852 Rev. *B
26.8.25 CLK_ILO1_CONFIG
Description:
ILO1 Configuration
Address:
0x4026150C
Offset:
0x150C
Retention:
Retained
IsDeepSleep:
Yes
Comment:
Configuration register for ILO1.
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name None [7:0]
Bits 15 14 13 12 11 10 9 8
Name None [15:8]
Bits 23 22 21 20 19 18 17 16
Name None [23:16]
Bits 31 30 29 28 27 26 25 24
Name ENABLE
[31:31]
ILO1_MON
_ENABLE
[30:30]
None [29:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
30 ILO1_MON_ENABLE RW R 0 Reserved. Always write a zero.
31 ENABLE RW R 0 Master enable for ILO1.
HT-variant: After enabling, the first ILO1 cycle occurs
within 12us and is +/-10 percent accuracy. Thereafter,
ILO1 is +/-5 percent accurate.
1664
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers