Technical Reference Manual 002-29852 Rev. *B
14.2.27.3 FLASHC_FM_ADDR
Description:
Flash Macro Address
Address:
0x4024F008
Offset:
0x8
Retention:
Not Retained
IsDeepSleep:
No
Comment:
This register specifies the flash memory address till the byte resolution. This register defines
the address space for both Code and Work Flash and it works according to the address
scheme tables defined below (also used as the address definition for R-bus ( code_r_addr and
work_r_addr)
This FM_ADDR should be used whenever a user mode embedded operation is done on the
Flash i.e. PGM/ERS
Default:
0x0
Bit-field Table
Bits 7 6 5 4 3 2 1 0
Name FM_ADDR [7:0]
Bits 15 14 13 12 11 10 9 8
Name FM_ADDR [15:8]
Bits 23 22 21 20 19 18 17 16
Name FM_ADDR [23:16]
Bits 31 30 29 28 27 26 25 24
Name FM_ADDR [31:24]
Bit-fields
Bits Name SW HW Default or
Enum
Description
0:31 FM_ADDR W R 0 Code or Work Flash Address to be used during write
operations (PGM/ERS)
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers
To Next Page
Loading...
