EasyManua.ls Logo

Infineon TRAVEO T2G - Page 1051

Infineon TRAVEO T2G
1825 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical Reference Manual 002-29852 Rev. *B
Bits Name SW HW Default or
Enum
Description
5 RX_DATA0_FRAME
_ERROR
R W 0 Frame response, first data field frame error. HW sets
this field to '1' when the received STOP bits of the first
response data field have an unexpected value (only
after a RX_HEADER command), and this data byte is
0x00. HW clears this field to '0' at the falling edge of
SYNC start bit (after
INTR.RX_HEADER_BREAK_WAKEUP_DONE). This
field is used together with
INTR.RX_RESPONSE_FRAME_ERROR to
distinguish 'no response', 'error response' and 'correct
response' scenarios.
Note: The ongoing message transfer is NOT aborted.
8 TX_BUSY R W 0 Transmitter busy.
- Set to '1' on the start of the following commands:
TX_HEADER, TX_RESPONSE, TX_WAKEUP.
- Set to '0' on successful completion of previous
commands or when an error is detected.
In 'TX_HEADER, RX_RESPONSE' case, set to '0' at
the start bit falling edge in the first response data byte,
after header transmission
9 RX_BUSY R W 0 Receiver busy.
- Set to '1' on the start of the following commands:
RX_HEADER, RX_RESPONSE.
in RX_HEADER case, set at Break filed rising edge.
in RX_RESPONSE case, set at the start bit falling
edge in the first response data byte.
- Set to '0' on successful completion of previous
commands or when an error is detected.
12 TX_DONE R W 0 Transmitter done:
- Set to '0' on the start of a new command.
- Set to '1' on successful completion of the following
command sequences (if CTL.AUTO_EN is '1', this
includes the 4-bit period external transceiver disable
post-amble):
- TX_HEADER.
- TX_HEADER, TX_RESPONSE.
- RX_HEADER, TX_RESPONSE.
- TX_WAKEUP.
13 RX_DONE R W 0 Receiver done:
- Set to '0' on the start of a new command.
- Set to '1' on successful completion of the following
command sequences (if CTL.AUTO_EN is '1', this
includes the 4-bit period external transceiver disable
post-amble):
- RX_HEADER, RX_RESPONSE.
- TX_HEADER, RX_RESPONSE.
16 TX_HEADER_BIT
_ERROR
R W 0 Copy of INTR.TX_HEADER_BIT_ERROR.
17 TX_RESPONSE_BIT
_ERROR
R W 0 Copy of INTR.TX_RESPONSE_BIT_ERROR.
24 RX_HEADER_FRAME
_ERROR
R W 0 Copy of INTR.RX_HEADER_FRAME_ERROR.
25 RX_HEADER_SYNC
_ERROR
R W 0 Copy of INTR.RX_HEADER_SYNC_ERROR.
26 RX_HEADER_PARITY
_ERROR
R W 0 Copy of INTR.RX_HEADER_PARITY_ERROR.
27 RX_RESPONSE_FRAME
_ERROR
R W 0 Copy of INTR.RX_RESPONSE_FRAME_ERROR.
1051
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers

Table of Contents

Other manuals for Infineon TRAVEO T2G

Related product manuals