Technical Reference Manual 002-29852 Rev. *B
Bits Name SW HW Default or
Enum
Description
4 M_STOP RW RW1C 0 When '1', attempt to transmit a STOP. When this
action is performed, the hardware sets this field to '0'.
I2C_M_CMD.M_START has a higher priority than this
command: in situations where both a STOP and a
REPEATED START could be transmitted, M_START
takes precedence over M_STOP.
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers
To Next Page
Loading...
