Infineon TRAVEO T2G - Page 1620

Technical Reference Manual 002-29852 Rev. *B
Bits Name SW HW Default or
Enum
Description
8:11 LUT_TR1_SEL RW R Undefined LUT input signal 'tr1_in' source selection:
'0': LUT 0 output.
'1': LUT 1 output.
'2': LUT 2 output.
'3': LUT 3 output.
'4': LUT 4 output.
'5': LUT 5 output.
'6': LUT 6 output.
'7': LUT 7 output.
'8': chip_data[0] (for LUTs 0, 1, 2, 3); chip_data[4] (for
LUTs 4, 5, 6, 7).
'9': chip_data[1] (for LUTs 0, 1, 2, 3); chip_data[5] (for
LUTs 4, 5, 6, 7).
'10': chip_data[2] (for LUTs 0, 1, 2, 3); chip_data[6] (for
LUTs 4, 5, 6, 7).
'11': chip_data[3] (for LUTs 0, 1, 2, 3); chip_data[7] (for
LUTs 4, 5, 6, 7).
'12': io_data_in[0] (for LUTs 0, 1, 2, 3); io_data_in[4]
(for LUTs 4, 5, 6, 7).
'13': io_data_in[1] (for LUTs 0, 1, 2, 3); io_data_in[5]
(for LUTs 4, 5, 6, 7).
'14': io_data_in[2] (for LUTs 0, 1, 2, 3); io_data_in[6]
(for LUTs 4, 5, 6, 7).
'15': io_data_in[3] (for LUTs 0, 1, 2, 3); io_data_in[7]
(for LUTs 4, 5, 6, 7).
16:19 LUT_TR2_SEL RW R Undefined LUT input signal 'tr2_in' source selection. Encoding is
the same as for LUT_TR1_SEL.
1620
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers