Technical Reference Manual 002-29852 Rev. *B
Bits Name SW HW Default or
Enum
Description
PWM 2 PWM signal 'line'
PWM_INV 3 inverted PWM signal 'line'
Z 4 The output 'line_compl_out' is not driven by the
TCPWM. Instead the port default level configuration
applies, e.g. 'Z' (high impedance).
Note: This is realized by driving the output
'line_compl_out_en' to 0.
Reserved5 5 N/A
Reserved6 6 N/A
Reserved7 7 N/A
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers
To Next Page
Loading...
