Technical Reference Manual 002-29852 Rev. *B
Bits Name SW HW Default or
Enum
Description
18 SYS_DISABLE RW1S R 0 Disables the system AP interface:
'0': Enabled.
'1': Disabled.
Typically, this field is set by the Cypress boot code
with information from eFUSE. The access port is only
enabled when SYS_DISABLE is '0' and SYS_ENABLE
is '1'.
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers
To Next Page
Loading...
