Infineon TRAVEO T2G - Page 770

Technical Reference Manual 002-29852 Rev. *B
Bits Name SW HW Default or
Enum
Description
22:30 T_OFFSET RW R 0 The value of offset that is used for sampling the 'rx'.
The value of this counter is used in HW as below.
- 0 : means 1 clock after detecting falling edge of 'rx'
- 1 : means 2 clocks after detecting falling edge of 'rx'
..
- 7 : means 8 clocks after detecting falling edge of 'rx'
..
- 15 : means 16 clocks after detecting falling edge of
'rx'
..
- 399 : means 400 clocks after detecting falling edge of
'rx'
Any value above 399 is invalid.
770
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers