Allied Telesis AlliedWare Plus - Page 1161

C613-50100-01 REV C Command Reference for x930 Series 1161
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
BGP AND BGP4+ COMMANDS
AGGREGATE
-ADDRESS
Examples
[BGP4+]
awplus# configure terminal
awplus(config)# router bgp 100
awplus(config-router)# address family ipv6
awplus(config-router-af)# aggregate-address 2001:0db8::/64
as-set summary-only
awplus# configure terminal
awplus(config)# router bgp 100
awplus(config-router)# address family ipv6
awplus(config-router-af)# no aggregate-address 2001:0db8::/64
as-set summary-only
Related
Commands
aggregate-address
match as-path (Route Map)