C613-50100-01 REV C Command Reference for x930 Series 1423
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
BGP AND BGP4+ COMMANDS
SHOW
IP BGP SCAN (BGP ONLY)
show ip bgp scan (BGP only)
Overview Use this command to display BGP scan status.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip bgp scan
Mode User Exec and Privileged Exec
Example
awplus# show ip bgp scan
Output Figure 28-14: Example output from the show ip bgp scan command
BGP scan is running
BGP scan interval is 60
BGP instance : AS is 11,DEFAULT
Current BGP nexthop cache:
BGP connected route:
10.10.10.0/24
10.10.11.0/24
To Next Page
Loading...
Need help?
General
