C613-50100-01 REV C Command Reference for x930 Series 2675
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ALLIED TELESIS MANAGEMENT FRAMEWORK™ (AMF) COMMANDS
SHOW
ATMF WORKING-SET
show atmf working-set
Overview This command displays the nodes that form the current AMF working-set.
Syntax
show atmf working-set
Mode Privileged Exec
Example To show current members of the working-set, use the command:
ATMF_NETWORK[6]# show atmf working-set
Related
Commands
atmf working-set
show atmf
show atmf group
Table 63: Sample output from the show atmf working-set command.
ATMF Working Set Nodes:
node1, node2, node3, node4, node5, node6
Working set contains 6 nodes
To Next Page
Loading...
Need help?
General
