C613-50100-01 REV C Command Reference for x930 Series 927
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
RIPNG FOR IPV6 COMMANDS
DEFAULT
-INFORMATION ORIGINATE (IPV6 RIPNG)
default-information originate (IPv6 RIPng)
Overview Use this command to generate a default route into RIPng.
Use the no variant of this command to disable this feature.
Syntax
default-information originate
no default-information originate
Default Disabled
Mode Router Configuration
Example
awplus# configure terminal
awplus(config)# router ipv6 rip
awplus(config-router)# default-information originate