Allied Telesis AlliedWare Plus User Manual

C613-50100-01 REV C Command Reference for x930 Series 1830
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
PIM-DM COMMANDS
DEBUG
PIM DENSE-MODE CONTEXT
debug pim dense-mode context
Overview This command enables debugging of general configuration context.
The no variant of this command disables debugging of general configuration
context.
This command also enables debugging of general configuration and Virtual
Routing (VR), and Virtual Routing and Forwarding (VRF) context.
The no variant of this command also disables debugging of general configuration
and Virtual Routing (VR), and Virtual Routing and Forwarding (VRF) context.
Syntax
debug pim dense-mode context
no debug pim dense-mode context
Mode Privileged Exec and Global Configuration
Example
awplus# configure terminal
awplus(config)# debug pim dense-mode context
Related
Commands
debug pim dense-mode all
debug pim dense-mode decode
debug pim dense-mode encode
debug pim dense-mode fsm
debug pim dense-mode mrt
debug pim dense-mode nexthop
debug pim dense-mode nsm
debug pim dense-mode vif

Allied Telesis AlliedWare Plus Specifications

General

Brand	Allied Telesis
Model	AlliedWare Plus
Category	Switch
Language	English