C613-50100-01 REV C Command Reference for x930 Series 755
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
IP ADDRESSING AND PROTOCOL COMMANDS
ROUTER
IP IRDP
router ip irdp
Overview This command globally enables ICMP Router Discovery (IRDP) advertisements on
your device. However, your device does not send or process IRDP messages until
at least one interface is configured to use IP and has had IRDP enabled on the
interface with the ip irdp command.
The no variant of this command globally disables IRDP advertisements on the
device. All interfaces immediately stop transmitting and processing Router
Discovery messages.
Syntax
router ip irdp
no router ip irdp
Mode Global Configuration
Examples To enable Router Discovery advertisements on your device, use the following
commands:
awplus# configure terminal
awplus(config)# router ip irdp
To disable Router Discovery advertisements on your device, use the following
commands:
awplus# configure terminal
awplus(config)# no router ip irdp
Related
Commands
ip irdp
show ip irdp
To Next Page
Loading...
Need help?
General
