Allied Telesis AlliedWare Plus User Manual

C613-50100-01 REV C Command Reference for x930 Series 287
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SYSTEM CONFIGURATION AND MONITORING COMMANDS
SHOW
SECURE-MODE
show secure-mode
Overview Use this command to see whether secure mode is enabled or not. Secure mode
disables a number of insecure features, such as Telnet.
Syntax
show secure-mode
Mode User Exec/Privileged Exec
Example To see if secure mode is enabled, use the command:
awplus# show secure-mode
Output Figure 7-17: Example output from show secure-mode
Related
Commands
crypto secure-mode
awplus#show secure-mode
Secure mode is enabled

Allied Telesis AlliedWare Plus Specifications

General

Brand	Allied Telesis
Model	AlliedWare Plus
Category	Switch
Language	English