C613-50100-01 REV C Command Reference for x930 Series 2579
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ALLIED TELESIS MANAGEMENT FRAMEWORK™ (AMF) COMMANDS
ATMF
PROVISION NODE CLONE
atmf provision node clone
Overview This command sets up a space on the backup media for use with a provisioned
node and copies into it almost all files and directories from a chosen backup or
provisioned node.
Alternatively, you can set up a new, unique provisioned node by using the
command atmf provision node create.
Syntax
atmf provision node <nodename> clone <source-nodename>
Mode Privileged Exec
Usage This command is only available on master nodes in the AMF network.
You must run either this command or atmf provision node create command,
before you can use other atmf provision node commands using the specified
node name. If a backup or provisioned node already exists for the specified node
then you must delete it before using the atmf provision node clone command.
When using this command it is important to be aware of the following:
•A copy of <media>:atmf/<atmf_name>/nodes/<source_node>/flash will be
made for the provisioned node and stored in the backup media.
•The directory <node_backup_dir>/flash/.config/ssh is excluded from the
copy.
• All contents of <root_backup_dir>/nodes/<nodename> will be deleted or
overwritten.
• Settings for the expected location of other provisioned nodes are excluded
from the copy.
The active and backup configuration files are automatically modified in the
following ways:
•The hostname command is modified to match the name of the provisioned
node.
•The stack virtual-chassis-id command is removed, if present.
Example To copy from the backup of device2 to create backup files for the new provisioned
node device3 use the following command:
device1# atmf provision node device3 clone device2
Parameter Description
<nodename> The name that will be assigned to the clone when
connected.
<source-nodename> The name of the node whose configuration is to be
copied for loading to the clone.
To Next Page
Loading...
Need help?
General
