C613-50100-01 REV C Command Reference for x930 Series 2730
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
DYNAMIC HOST CONFIGURATION PROTOCOL (DHCP) COMMANDS
ROUTE
route
Overview This command allows the DHCP server to provide static routes to clients.
Syntax
route A.B.C.D/M A.B.C.D {both|opt249|rfc3442}
Mode DHCP Configuration
Examples To distribute static routes for route 0.0.0.0/0 whose next hop is 192.16.1.1
to clients using both opt249 and rfc3442, use the command:
awplus# configure terminal
awplus(config)# ip dhcp pool pubic
awplus(dhcp-config)# route 0.0.0.0/0 192.16.1.1 both
Related
Commands
ip dhcp pool
Parameter Description
A.B.C.D/M Subnet for the route
A.B.C.D Next hop for the route
both opt249 and rft3442
opt249 Classless static route option for DHCP
rfc3442 Classless static route option for DHCP
To Next Page
Loading...
Need help?
General
