C613-50100-01 REV C Command Reference for x930 Series 798
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
DOMAIN NAME SERVICE (DNS) COMMANDS
SHOW
IP DNS FORWARDING CACHE
show ip dns forwarding cache
Overview Use this command to display the DNS Relay name resolver cache.
Syntax
show ip dns forwarding cache
Syntax (VRF lite) show ip dns [vrf <name>|global] forwarding cache
Mode User Exec and Privileged Exec
Example To display the DNS Relay name resolver cache, use the command:
awplus# show ip dns forwarding cache
Output Figure 21-4: Example output from the show ip dns forwarding cache
command
Example (VRF
lite)
To display the DNS Relay name resolver cache with output for VRF lite instance
RED, use the command:
awplus# show ip dns vrf RED forwarding cache
Parameter Description
vrf Apply this command to the specified VRF lite instance.
<name> The name of the specific VRF lite instance
global When VRF lite is configured, apply this command to the global
routing and forwarding table.
awplus#show ip dns forwarding cache
Host Address Expires Flags
www.example.com 172.16.1.1. 180
mail.example.com www.example.com 180 CNAME
www.example.com 172.16.1.1. 180 REVERSE
mail.example.com 172.16.1.5. 180
To Next Page
Loading...
Need help?
General
