C613-50100-01 REV C Command Reference for x930 Series 109
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
CLI NAVIGATION COMMANDS
END
end
Overview This command returns the prompt to the Privileged Exec command mode from
any other advanced command mode.
Syntax
end
Mode All advanced command modes, including Global Configuration and Interface
Configuration modes.
Example The following example shows the use of the end command to return to the
Privileged Exec mode directly from Interface mode.
awplus# configure terminal
awplus(config)# interface vlan2
awplus(config-if)# end
awplus#
Related
Commands
disable (Privileged Exec mode)
enable (Privileged Exec mode)
exit
To Next Page
Loading...
Need help?
General
