C613-50100-01 REV C Command Reference for x930 Series 396
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
LOGGING COMMANDS
SHOW
EXCEPTION LOG
show exception log
Overview This command displays the contents of the exception log.
Syntax
show exception log
Mode User Exec and Privileged Exec
Example To display the exception log, use the command:
awplus# show exception log
Output Figure 9-2: Example output from the show exception log command on a
device
awplus#show exception log
Stack member 1:
<date> <time> <facility>.<severity>
<program[<pid>]>: <message>
-------------------------------------------------------------------------
2014 Jan 27 09:57:47 local7.debug awplus corehandler : Process imish (PID:3746)
signal 11, core dumped to /flash/imish-x610-5.4.3-3.7-1-1390816667-3746.tgz
2014 Jan 27 09:57:47 local7.debug awplus corehandler : Process imish (PID:2504)
signal 11, core dumped to /flash/imish-x610-5.4.3-3.7-1-1390816667-2504.tgz
2014 Jan 27 09:58:02 local7.debug awplus corehandler : Process ospfd (PID:1512)
signal 5, core dumped to /flash/ospfd-x610-5.4.3-3.7-1-1390816682-1512.tgz
-------------------------------------------------------------------------
Stack member 2:
<date> <time> <facility>.<severity>
<program[<pid>]>: <message>
-------------------------------------------------------------------------
2014 Jan 27 09:58:16 local7.debug awplus-2 corehandler : Process imi (PID:1427)
signal 5, core dumped to /flash/imi-x610-5.4.3-3.7-2-1390816696-1427.tgz
-------------------------------------------------------------------------
To Next Page
Loading...
Need help?
General
