C613-50100-01 REV C Command Reference for x930 Series 700
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
GVRP COMMANDS
SHOW
GVRP CONFIGURATION
show gvrp configuration
Overview Use this command to display GVRP configuration data for a switch.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show gvrp configuration
Mode User Exec and Privileged Exec
Example To show GVRP configuration for the switch, enter the command:
awplus# show gvrp configuration
Output The following is an output of this command displaying the GVRP configuration for
a switch:
awplus#show gvrp configuration
Global GVRP Configuration:
GVRP Feature: Enabled
Dynamic Vlan Creation: Disabled
Port based GVRP Configuration:
Timers(centiseconds)
Port GVRP Status Registration Applicant Join Leave LeaveAll
----------------------------------------------------------------
port1.0.1 Enabled Normal Normal 20 60 1000
port1.0.2 Enabled Normal Normal 200 600 10000
To Next Page
Loading...
Need help?
General
