C613-50100-01 REV C Command Reference for x930 Series 1712
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
MULTICAST COMMANDS
SHOW
IPV6 MIF
show ipv6 mif
Overview Use this command to display the contents of the IPv6 Multicast Routing
Information Base (MRIB) MIF table.
Syntax
show ipv6 mif [<interface>]
Mode User Exec and Privileged Exec
Example
awplus# show ipv6 mif
awplus# show ipv6 mif vlan2
Output Figure 33-12: Example output from the show ipv6 mif command
Figure 33-13: Example output from the show ipv6 mif command with the
interface parameter vlan2 specified
Parameter Description
<interface> The interface to display information about.
awplus#show ipv6 mif
Interface Mif Owner Uptime
Idx Module
vlan3 0 MLD/MLD Proxy-Service 03:28:48
vlan2 1 MLD/MLD Proxy-Service 03:28:48
vlan1 2 MLD/MLD Proxy-Service 03:28:48
Interface Mif Owner TTL Remote Uptime
Idx Module Address
vlan2 0 PIM-SMv6 1 0.0.0.0 00:05:17
To Next Page
Loading...
Need help?
General
