Allied Telesis AlliedWare Plus - Debug Vrrp

C613-50100-01 REV C Command Reference for x930 Series 2472
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
VRRP COMMANDS
DEBUG
VRRP
debug vrrp
Overview Use this command to specify debugging options for VRRP. The all parameter turns
on all the debugging options.
Use the no variant of this command to disable this function.
Syntax
debug vrrp [all]
no debug vrrp [all]
Mode Privileged Exec and Global Configuration
Usage See the VRRP Feature Overview and Configuration Guide for more information
about VRRPv3 debugging details.
Examples The example below shows you how to enable all debugging for VRRP:
awplus# configure terminal
awplus(config)# debug vrrp all
The example below shows you how to disable all debugging for VRRP:
awplus# configure terminal
awplus(config)# no debug vrrp all
Related
Commands
show debugging vrrp
undebug vrrp