C613-50100-01 REV C Command Reference for x930 Series 926
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
RIPNG FOR IPV6 COMMANDS
DEBUG
IPV6 RIP
debug ipv6 rip
Overview Use this command to enable RIPng debugging and specify debugging for RIPng
events, RIPng packets, or RIPng communication with NSM processes.
Use the no variant of this command to disable RIPng debugging.
Syntax
debug ipv6 rip [all|events|nsm|packet [detail]|recv
[detail]|send [detail]]
no debug ipv6 rip [all|events|nsm|packet [detail]|recv
[detail]|send [detail]]
Default RIPng debugging is disabled by default.
Mode Privileged Exec and Global Configuration
Example
awplus# debug ipv6 rip events
awplus# debug ipv6 rip packet send detail
awplus# debug ipv6 rip nsm
Related
Commands
undebug ipv6 rip
Parameter Description
all Displays all RIPng debugging showing RIPng events debug
information, RIPng received packets information, and RIPng sent
packets information.
events Displays RIPng events debug information.
nsm Displays RIPng and NSM communication.
packet Displays RIPng packets only.
recv Displays information for received packets.
send Displays information for sent packets.
detail Displays detailed information for the sent or received packet.
To Next Page
Loading...
Need help?
General
