C613-50100-01 REV C Command Reference for x930 Series 1675
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
MLD AND MLD SNOOPING COMMANDS
SHOW
DEBUGGING MLD
show debugging mld
Overview Use this command to display the MLD debugging modes enabled with the debug
mld command.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show debugging mld
Mode Privileged Exec
Example
awplus# show debugging mld
Output
Related
Commands
debug mld
show debugging mld
MLD Debugging status:
MLD Decoder debugging is on
MLD Encoder debugging is on
MLD Events debugging is on
MLD FSM debugging is on
MLD Tree-Info-Base (TIB) debugging is on
To Next Page
Loading...
Need help?
General
