C613-50100-01 REV C Command Reference for x930 Series 1475
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ROUTE MAP COMMANDS
SHOW
ROUTE-MAP
show route-map
Overview Use this command to display information about one or all route maps.
Syntax
show route-map <map-name>
Mode User Exec and Privileged Exec
Example To display information about the route-map named example-map, use the
command:
awplus# show route-map example-map
Output Figure 29-1: Example output from the show route-map command
Related
Commands
route-map
Parameter Description
<map-name> A name to identify the route map.
route-map example-map, permit, sequence 1
Match clauses:
ip address prefix-list example-pref
Set clauses:
metric 100
route-map example-map, permit, sequence 200
Match clauses:
Set clauses:
To Next Page
Loading...
Need help?
General
