C613-50100-01 REV C Command Reference for x930 Series 975
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
OSPF COMMANDS
DEBUG
OSPF ROUTE
debug ospf route
Overview This command enables debugging of route calculation. Use this command
without parameters to turn on all the options.
To enable all debugging options, specify debug ospf route with no additional
parameters.
The no and undebug variant of this command disable OSPF route debugging. Use
this command without parameters to disable all options.
Syntax
debug ospf route [ase] [ia] [install] [spf]
no debug ospf route [ase] [ia] [install] [spf]
Mode Privileged Exec and Global Configuration
Examples
awplus# debug ospf route
awplus# no debug ospf route ia
awplus# debug ospf route install
awplus# undebug ospf route install
Related
Commands
terminal monitor
undebug ospf route
Parameter Description
ia Specifies the debugging of Inter-Area route calculation.
ase Specifies the debugging of external route calculation.
install Specifies the debugging of route installation.
spf Specifies the debugging of SPF calculation.
To Next Page
Loading...
Need help?
General
