EasyManuals Logo

Allied Telesis AlliedWare Plus User Manual

Allied Telesis AlliedWare Plus
3082 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1509 background imageLoading...
Page #1509 background image
C613-50100-01 REV C Command Reference for x930 Series 1509
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
VRF LITE COMMANDS
MAX
-FIB-ROUTES (VRF)
max-fib-routes (VRF)
Overview This command now enables you to control the maximum number of FIB routes
configured for a VRF instance. It operates by providing parameters that enable you
to configure preset maximums and warning message thresholds.
NOTE: This command applies to a user-defined VRF instance; to set the max-fib-routes
for the Global VRF instance use the max-fib-routes command. For static routes use the
max-static-routes command for the Global VRF instance and the max-static-routes
(VRF) command for a user-defined VRF instance.
Use the no variant of this command to set the maximum number of FIB routes to
the default of 4294967294 FIB routes.
Syntax
max-fib-routes <1-4294967294> [<1-100>|warning-only]
no max-fib-routes
Mode VRF-Mode
Default Sets the maximum number of dynamic routes to 4294967294 and no warning
threshold.
Examples To set the maximum number of dynamic routes to 2000 and warning threshold of
75%, on VRF instance blue, use the following commands:
awplus# config terminal
awplus(config)# ip vrf blue
awplus(config-vrf)# max-fib-routes 2000 75
Parameter Description
max-fib-routes The maximum number of routes that can be stored in
Forwarding Information dataBase for either the Global VRF or a
VRF instance.
<1-4294967294> The allowable configurable range for setting the maximum
number of FIB-routes.
<1-100> This parameter enables you to optionally apply a percentage
value. This percentage will be based on the maximum number
of FIB routes you have specified. This will cause a warning
message to appear when your routes reach your specified
percentage value. Routes can continue to be added until your
configured maximum value is reached.
warning-only This parameter enables you to optionally apply a warning
message. If you set this option a warning message will appear if
your maximum configured value configured. Routes can
continue to be added until your switch reaches either the
maximum capacity value of 4294967294, or a practical system
limit.

Table of Contents

Other manuals for Allied Telesis AlliedWare Plus

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Allied Telesis AlliedWare Plus and is the answer not in the manual?

Allied Telesis AlliedWare Plus Specifications

General IconGeneral
BrandAllied Telesis
ModelAlliedWare Plus
CategorySwitch
LanguageEnglish

Related product manuals