C613-50100-01 REV C Command Reference for x930 Series 1212
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
BGP AND BGP4+ COMMANDS
CLEAR
IP BGP FLAP-STATISTICS (BGP ONLY)
clear ip bgp flap-statistics (BGP only)
Overview Use this command to clear the flap count and history duration for the specified
prefixes.
Syntax
clear ip bgp flap-statistics [<ip-address>|<ip-address/m>]
Mode Privileged Exec
Examples
awplus# clear ip bgp flap-statistics 10.10.0.121
Parameter Description
<ip-address> Specifies the IPv4 address for which BGP flap count and history
duration are to be cleared.
<ip-address/m> Specifies the IPv4 address with mask for which BGP flap count
and history duration are to be cleared.
ipv4 Clears all IPv4 address family peers. Configure parameters
relating to the BGP exchange of IPv4 prefixes.
To Next Page
Loading...
Need help?
General
