C613-50100-01 REV C Command Reference for x930 Series 512
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
VLAN COMMANDS
CLEAR
VLAN STATISTICS
clear vlan statistics
Overview This command resets the counters for either a specific VLAN statistics instance or
(by not specifying an instance) resets the counters for all instances.
The terms frame and packet are used interchangeably.
Syntax
clear vlan statistics [name <instance_name>]
Mode Privileged Exec
Examples To reset all packet counters for the packet counter instance vlan2-data:
awplus# clear vlan statistics name vlan2-data
To reset all packet counters for all packet counter instances.
awplus# clear vlan statistics
Related
Commands
show vlan statistics
vlan statistics
Parameter Description
vlan statistics The count of incoming frames or bytes collected on a per VLAN
basis.
1
<instance-name> The name of the instance for which incoming frames and their
bytes are counted.
1
To Next Page
Loading...
