C613-50100-01 REV C Command Reference for x930 Series 2948
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
RMON COMMANDS
SHOW
RMON STATISTICS
show rmon statistics
Overview Use this command to display the current values of the statistics for all the RMON
statistics collections currently defined on the device.
NOTE: Only statistics for switch port interfaces, not for VLAN interfaces, can be shown.
Syntax
show rmon statistics
Mode User Exec and Privileged Exec
Example To display the current values of the statistics for all the RMON statistics collections,
us the commands:
awplus# show rmon statistics
Output Figure 61-3: Example output from the show rmon statistics command
NOTE: The following etherStats counters are not currently available for Layer 3
interfaces:
• etherStatsBroadcastPkts
• etherStatsCRCAlignErrors
• etherStatsUndersizePkts
•etherStatsOversizePkts
• etherStatsFragments
• etherStatsJabbers
• etherStatsCollisions
• etherStatsPkts64Octets
• etherStatsPkts65to127Octets
• etherStatsPkts128to255Octets
• etherStatsPkts256to511Octets
• etherStatsPkts512to1023Octets
awplus#show rmon statistics
rmon collection index 45
stats->ifindex = 4501
input packets 1279340, bytes 85858960, dropped 00, multicast packets 1272100
output packets 7306090, bytes 268724, multicast packets 7305660 broadcast
packets 290
rmon collection index 679
stats->ifindex = 5013
input packets 00, bytes 00, dropped 00, multicast packets 00
output packets 8554550, bytes 26777324, multicast packets 8546690 broadcast
packets 7720
To Next Page
Loading...
Need help?
General
