C613-50100-01 REV C Command Reference for x930 Series 1545
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
VRF LITE COMMANDS
SHOW
IP BGP CIDR-ONLY (BGP ONLY)
show ip bgp cidr-only (BGP only)
Overview Use this command to display routes with non-natural network masks.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip bgp cidr-only
Syntax [VRF] show ip bgp [global|vrf <vrf-name>] cidr-only
Mode User Exec and Privileged Exec
Example
awplus# show ip bgp cidr-only
awplus# show ip bgp vrf red cidr-only
Output Figure 30-4: Example output from the show ip bgp cidr-only command
Parameter Description
global When VRF lite is configured, apply the command to the global
routing and forwarding table.
vrf Apply the command to the specified VRF instance.
<vrf-name> The name of the VRF instance.
BGP table version is 0, local router ID is 10.10.10.50
Status codes: s suppressed, d damped, h history, p stale, *
valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 3.3.3.0/24 10.10.10.10 0 11 i
*> 6.6.6.0/24 0.0.0.0 32768 i
Total number of prefixes 2
To Next Page
Loading...
