C613-50100-01 REV C Command Reference for x930 Series 631
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SPANNING TREE COMMANDS
SPANNING
-TREE RESTRICTED-ROLE
spanning-tree restricted-role
Overview Use this command in Interface Configuration mode for a switch port interface only
to restrict the port from becoming a root port.
Use the no variant of this command to disable the restricted role functionality.
Syntax
spanning-tree restricted-role
no spanning-tree restricted-role
Default The restricted role is disabled.
Mode Interface Configuration mode for a switch port interface only.
Example
awplus# configure terminal
awplus(config)# interface port1.0.2
awplus(config-if)# spanning-tree restricted-role
To Next Page
Loading...
