C613-50100-01 REV C Command Reference for x930 Series 133
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
FILE AND CONFIGURATION MANAGEMENT COMMANDS
CREATE
AUTOBOOT
create autoboot
Overview Use this command to create an autoboot.txt file on external media. This
command will automatically ensure that the keys and values that are expected in
this file are correct. After the file is created the create autoboot command will
copy the current release and configuration files across to the external media. The
external media is then available to restore a release file and/or a configuration file
to the device.
Syntax
create autoboot usb
Mode Privileged Exec
Example To create an autoboot.txt file on a USB storage device, use the command:
awplus# create autoboot usb
Related
Commands
autoboot enable
show autoboot
show boot
To Next Page
Loading...
Need help?
General
