C613-50100-01 REV C Command Reference for x930 Series 2830
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SNMP COMMANDS
DEBUG
SNMP
debug snmp
Overview This command enables SNMP debugging.
The no variant of this command disables SNMP debugging.
Syntax
debug snmp
[all|detail|error-string|process|receive|send|xdump]
no debug snmp
[all|detail|error-string|process|receive|send|xdump]
Mode Privileged Exec and Global Configuration
Example To start SNMP debugging, use the command:
awplus# debug snmp
To start SNMP debugging, showing detailed SNMP debugging information, use
the command:
awplus# debug snmp detail
To start SNMP debugging, showing all SNMP debugging information, use the
command:
awplus# debug snmp all
Related
Commands
show debugging snmp
terminal monitor
undebug snmp
Parameter Description
all Enable or disable the display of all SNMP debugging information.
detail Enable or disable the display of detailed SNMP debugging
information.
error-string Enable or disable the display of debugging information for SNMP
error strings.
process Enable or disable the display of debugging information for
processed SNMP packets.
receive Enable or disable the display of debugging information for
received SNMP packets.
send Enable or disable the display of debugging information for sent
SNMP packets.
xdump Enable or disable the display of hexadecimal dump debugging
information for SNMP packets.
To Next Page
Loading...
Need help?
General
