C613-50100-01 REV C Command Reference for x930 Series 776
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
IP ADDRESSING AND PROTOCOL COMMANDS
TRACEROUTE
traceroute
Overview Use this command to trace the route to the specified IPv4 host.
Syntax
traceroute {<ip-addr>|<hostname>}
Syntax (VRF lite) traceroute [vrf <vrf-name>] {<ip-addr>|<hostname>}
Mode User Exec and Privileged Exec
Example
awplus# traceroute 10.10.0.5
Example (VRF
lite)
awplus# traceroute 10.10.0.5
awplus# traceroute vrf red 192.168.0.1
Parameter Description
<ip-addr> The destination IPv4 address. The IPv4 address uses the
format A.B.C.D.
<hostname> The destination hostname.
Parameter Description
vrf Apply the command to the specified VRF lite instance.
<vrf-name> The name of the VRF lite instance.
To Next Page
Loading...
