C613-50100-01 REV C Command Reference for x930 Series 2385
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
DHCP SNOOPING COMMANDS
SHOW
ARP SECURITY
show arp security
Overview Use this command to display ARP security configuration.
Syntax
show arp security
Mode User Exec and Privileged Exec
Example To display ARP security configuration on the switch use the command:
awplus# show arp security
Related
Commands
arp security
show arp security interface
show arp security statistics
Table 1: Example output from the show arp security command
awplus# show arp security
ARP Security Information:
Total VLANs enabled ............. 2
Total VLANs disabled ............ 11
vlan1 .............. Disabled
vlan2 .............. Disabled
vlan3 .............. Disabled
vlan4 .............. Disabled
vlan5 .............. Disabled
vlan100 ............ Disabled
vlan101 ............ Disabled
vlan102 ............ Disabled
vlan103 ............ Disabled
vlan104 ............ Disabled
vlan105 ............ Enabled
vlan1000 ........... Disabled
vlan1001 ........... Enabled
Table 2: Parameters in the output from the show arp security command
Parameter Description
Total VLANs enabled The number of VLANs that have ARP security enabled.
Total VLANs disabled The number of VLANs that have ARP security disabled.
To Next Page
Loading...
Need help?
General
