C613-50100-01 REV C Command Reference for x930 Series 2384
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
DHCP SNOOPING COMMANDS
SERVICE
DHCP-SNOOPING
any DHCP snooping ACLs from the ports to maintain connectivity (no
access-group command).
Examples To enable DHCP snooping on the switch, use the command:
awplus# configure terminal
awplus(config)# service dhcp-snooping
To disable DHCP snooping on the switch, use the command:
awplus# configure terminal
awplus(config)# no service dhcp-snooping
Related
Commands
ip dhcp snooping
ip dhcp snooping database
ip dhcp snooping max-bindings
show ip dhcp snooping
To Next Page
Loading...
