C613-50100-01 REV C Command Reference for x930 Series 648
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
LINK AGGREGATION COMMANDS
SHOW
DEBUGGING LACP
show debugging lacp
Overview Use this command to display the LACP debugging option set.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show debugging lacp
Mode User Exec and Privileged Exec
Example
awplus# show debugging lacp
Output Figure 17-1: Example output from the show debugging lacp command
Related
Commands
debug lacp
LACP debugging status:
LACP timer debugging is on
LACP timer-detail debugging is on
LACP cli debugging is on
LACP packet debugging is on
LACP event debugging is on
LACP sync debugging is on
To Next Page
Loading...
Need help?
General
