C613-50100-01 REV C Command Reference for x930 Series 211
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
FEATURE LICENSING COMMANDS
SHOW
LICENSE BRIEF MEMBER
show license brief member
Overview Use this command to display information about either a specific software license,
or all software feature licenses enabled on either a specific stack member or all
stack members.
Syntax
show license [<label>] brief member [<1-8>|all]
Mode User Exec and Privileged Exec
Usage Use the show license brief member all command for brief table output of all
licenses per stack member.
Examples To display a brief summary of information about all enabled licenses on stack
member 2, use the command:
awplus# show license brief member 2
To display a brief summary about all enabled licenses on all stack members, use the
command:
awplus# show license brief member all
To display a brief summary about the license name1 on all stack members, use the
command:
awplus# show license name1 brief member all
Output Figure 4-4: Example output from show license brief member
Parameter Description
<label> The name of the license to show information about.
brief Display a brief summary of license information.
<1-8> The ID of the stack member to show information about.
all Display information about all stack members.
awplus#show license brief member 1
Board region: Global
Software Release Licenses
------------------------------------------------------------------------
1
Base License 1 Base License
Full N/A
Current
enabled features for displayed licenses:
IPv6Basic,
LAG-FULL, MLDSnoop, RADIUS-100, VCS, VRRP
To Next Page
Loading...
Need help?
General
