22
C613-50100-01 REV C Command Reference for x930 Series 805
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
IPv6 Commands
Introduction
Overview This chapter provides an alphabetical reference of commands used to configure
IPv6. For more information, see the IPv6 Feature Overview and Configuration
Guide.
Command List •“clear ipv6 neighbors” on page 807
•“ipv6 address” on page 808
•“ipv6 address autoconfig” on page 810
•“ipv6 enable” on page 812
•“ipv6 forwarding” on page 814
•“ipv6 multicast forward-slow-path-packet” on page 815
•“ipv6 nd managed-config-flag” on page 816
•“ipv6 nd minimum-ra-interval” on page 817
•“ipv6 nd other-config-flag” on page 818
•“ipv6 nd prefix” on page 819
•“ipv6 nd ra-interval” on page 821
•“ipv6 nd ra-lifetime” on page 822
•“ipv6 nd raguard” on page 823
•“ipv6 nd reachable-time” on page 825
•“ipv6 nd retransmission-time” on page 826
•“ipv6 nd suppress-ra” on page 827
•“ipv6 neighbor” on page 828
•“ipv6 opportunistic-nd” on page 829
•“ipv6 route” on page 830
To Next Page
Loading...
Need help?
General
