C613-50100-01 REV C Command Reference for x930 Series 2261
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
RADIUS COMMANDS
RADIUS
-SERVER KEY
radius-server key
Overview This command sets a global secret key for RADIUS authentication on the device.
The shared secret text string is used for RADIUS authentication between the device
and a RADIUS server.
Note that if no secret key is explicitly specified for a RADIUS server, the global
secret key will be used for the shared secret for the server.
Use the no variant of this command to reset the secret key to the default (null).
Syntax
radius-server key <key>
no radius-server key
Default The RADIUS server secret key on the system is not set by default (null).
Mode Global Configuration
Usage Use this command to set the global secret key shared between this client and its
RADIUS servers. If no secret key is specified for a particular RADIUS server using the
radius-server host c ommand, this global key is used.
After enabling AAA authentication with the aaa authentication login command,
set the authentication and encryption key using the radius-server key command
so the key entered matches the key used on the RADIUS server.
Examples To set the global secret key to allied for RADIUS server, use the following
commands:
awplus# configure terminal
awplus(config)# radius-server key allied
To set the global secret key to secret for RADIUS server, use the following
commands:
awplus# configure terminal
awplus(config)# radius-server key secret
To delete the global secret key for RADIUS server, use the following commands:
awplus# configure terminal
awplus(config)# no radius-server key
Related
Commands
radius-server host
show radius statistics
Parameter Description
<key> Shared secret among radius server and 802.1X client.
To Next Page
Loading...
Need help?
General
