C613-50100-01 REV C Command Reference for x930 Series 1749
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
PIM-SM COMMANDS
SHOW
IP PIM SPARSE-MODE BSR-ROUTER
show ip pim sparse-mode bsr-router
Overview Use this command to show the Bootstrap Router (BSR) (v2) address.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip pim sparse-mode bsr-router
Mode User Exec and Privileged Exec
Output Figure 34-2: Output from the show ip pim sparse-mode bsr-router command
Related
Commands
show ip pim sparse-mode rp mapping
show ip pim sparse-mode neighbor
PIMv2 Bootstrap information
BSR address: 10.10.11.35 (?)
Uptime: 00:00:38, BSR Priority: 0, Hash mask length: 10
Expires: 00:01:32
Role: Non-candidate BSR
State: Accept Preferred
To Next Page
Loading...
Need help?
General
